Knux Shi
Admin
Posts : 438
Age : 32
Location : Balsam
 | | Subject: OPN Equipment Sun Sep 17, 2017 12:06 pm | |
| - Suit:
- White Knight Suit:
Equipment Name: Exoskeleton . Equipment Type: Gadget Strength Req.: T4 Equipment Description: The suit is made up of gold and titanium alloy giving it a light but sturdy fram. The suit is hard wired with it own on board power source. Furthermore the suit uses tech that allows the movement of the user to easy and elegant but also charge up power by moving. (like a hamster running on a wheel). All power collected would be stored in four batteries placed on the rear of the suit's lowerback. (Batteries can be made by Scientist) The suit also would hold 2 Thunder Dials as it's main power source. With the help of a Dials the suit can run off each Dial constantly unless overuse come in effect. Overuse can come from using the Suit's installed gear too much forcing the suit to overheat and shut down for 4 post.[Combined cd of the Dials.] This suit provides +1 Durability acting as an Armor for most of the body besides the head. It gives No strength benefits or speed Benefits in its base model. There is no bonus or penalty to vision or perception. Curse: N/A Materials:Gold and Titanium Units per Slot: 5 Upgrade Points:3 - I'm going to list them all here and what each upgrade point does for the suit.:
0 points: The suit is simply just an Exoskeleton. Give no Bonus, has one Dial for power source. Prototype if you will to test the suits movements to ensure it works as designed.
1 point: The suit was upgraded with it's Titanium alloy making it lighter and giving the +1 Durability.
2points: The suit was given the second Thunder Dial as a power source, while adding a thruster pack to the rear. The Thruster pack uses Jet Engines(Every small forms) to suction the air around the user then heat it and push it out. Allows to user to Dash 10 meters from starting location in any direction.
3Points: The suit has been upgraded with the exoskeleton system V 2.1 This allows the user to receive a small boost in Strength as the suit is now assisting in movements a lot more than before. +1 Strength.
4points: The suit is now installed with a blade of Plasma. The Plasma blade is only 8 inches in length and have a width of 1 inch, Very small and close weapon. It's able to Cut through Steel, Iron, Wood, and Stone. Deal Damage equal to its number of upgrade points. This bring slots used up by .5.
5 Points: Installed another Thunder Dial increasing slots used by 2. Thruster is now able to dash for a distance of 29 meters in either direction.
6 Points: The Final Product of this suit. Installed is a entergy canon, using the power of up all 3 Thunder dials can fire a series of blast. They are as following:
A normal blast charged from the thunder dial. Fires up to 2 blast. They deal at upgrade point equal to Tier damage.
Consumes the energy of one Dial leaving the suit to function with 2 Thunder Dials. Blaster is sphere shaped and only has a radius of 1 foot.
Enhanced blast, able to fire either 4 consecutive shots or 1 large blast consuming the power of 2 thunder dials. If 4 shots are used the Damage is still counted as at Upgrade points= to Tier. If one blast is use it gains an the power to stun target for 1 post.Blaster is sphere shaped and only has a radius of 2 foot.
Final Shot, using all three dials it send the suit into overheat mode. Resulting in Immediate shut down for 6 post. Using the power of all three dials a massive Energy cannon is fired out. The radius of the sphere shaped beam is 3 feet. The beam is concentrated and more effective dealing damage on a massive Scale. Deal number of upgrade points = to Tier. It also Applies T6 Thunder Effects
- Overheat System:
The overheat system is to stop the suit from using too much power and exploding. The over heating systems is as such. The suit's passive on board power with no weapons consume one charge of the the Dials power. Dials are allowed 2 charges per post, though since I'm not using them as attacks but as a power source the suit take 1 charge per post. Each Feature used consumes a charge as well. Meaning if the user Dashes forward that consumes a charge. So if the user has only one dial and dashes the suit will go into overheat mode and shut down for 2 post to not cause the dials to explode.
This feature can be override with a voice command allowing the user to use the suit and any abilities for one post, however after overriding this feature all dials will explode and do x2 normal damage of each dial.
- Plasma Cutter:
Equipment Name: Plasma Cutter Equipment Type: Gadget Strength Req.: T3 Equipment Description: Using the power of a Flavor Dial as well as the power of a Thunder dial combining these into a plasma cutter. Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut with a plasma torch include steel, Stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well. The Plasma cutter has a handle of six inches, it's able to be held with one or two hands. The tool can be used to make gadgets faster and more effective or as a weapon thanks to the adjustable dials for the beam. It can be widen out lowering the cutting power of the plasma beam but giving it a larger cutting surface. Same with the length giving it a max length for 4 foot. The max width of the plasma beam can only be an inch. When the adjustments are at the max allowing the plasma to be wide open it uses more of the gas within the dial. So in terms of increasing the width and length for more cutting surface there is a shorter life time on the blade and the effectiveness. However If both were to be maxed out it could cause the Plasma beam to send out an explosion damaging the User and whoever may be around in a 5 foot radius no to mention the gear. If used as a weapon the plasma cutter deals equal to upgrade points in tier of Damage. Curse: N/A Materials: Titanium Units per Slot: 1 Upgrade Points: 3 - Upgrade points:
- 1: With 1 upgrade points the plasma cutter is usable only one post for combat use. Removes 5% of WC for Gaudet's 1 Post CD
- 2: With 2 points the plasma cutter can be used two post for combat use. 2 post CD.
- 3: at three points gas flow is improved using less gas allowing it to be used for longer periods of time. Increases use to 3 post with a 2 post CD for combat use. Increases wc drop from 5% to 10%
- 4:Allows the user to make three gadgets within 24 hours. No WC reduction.
- 5:Improved Gas storage allowing Plasma beam to last longer. 4 post 3 post CD.
- 6: The plasma cutter has reached its optimal stage allowing the user to perform more jobs within a day. Thanks to the crafting to the fine tuning of the electrical power and adding an intake for air now using air to be heated instead of gas for the Plasma cutter burning less gases allowing for a more effective use. Cutting cost of gas in half lengthening the use for either shop or combat use. Usable the entire thread.
Extra: Dials will need to be Installed and attained from Dial spec. | |
|
